Microswitch For Headrest, Assembly Overview

Microswitch For Headrest, Assembly Overview







1. Cable tie
2. Connector
3. Circlip
4. Microswitch for headrest
- Removing
- Remove backrest panel.
- Use a screwdriver to pry out circlip - 3 -.
- Press together catches - 5 - (2x) and remove microswitch - 4 -.
- Disconnect connector - 2 -.
- Installing
- Press in microswitch - 4 - until the catches - 5 - (2x) engage.
- Connect connector - 2 -.
- Install seat.
- Adjust microswitch for headrest.
- Insert the circlip - 3 -.
- Install backrest panel.

5. Catches (2x)