System Diagram
Vacuum Diagram For Vehicles As Of 07.03
1. Resonator
2. Mechanical recirculation valve
3. Secondary Air Injection (AIR) Pump Motor -V101-
4. Wastegate Bypass Regulator Valve -N75-
5. Air filter
- With Mass Air Flow (MAF) Sensor -G70-
6. Check valve
- Installed position: Arrow on valve points in direction of flow, as shown in illustration.
7. to EVAP canister
8. Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
9. Turbocharger
10. Pressure regulator valve for crankshaft housing ventilation
11. Combination valve for secondary air injection (AIR)
12. Check valve for EVAP canister
- Installed position: Arrow on valve points in direction of flow, as shown in illustration.
13. To brake booster
14. Vacuum suction jet pump
15. Check valve
- Installed position: Arrow on valve points in direction of flow, as shown in illustration.
16. Crankshaft housing ventilation
17. Vacuum reservoir
- Component location: Under wheelhousing liner in front left wheelhousing
18. Check valve
- Installed position: Arrow on valve points in direction of flow, as shown in illustration.
19. to Leak Detection Pump (LDP) -V144-
20. Check valve
- Installed position: Arrow on valve points in direction of flow, as shown in illustration.
21. Secondary Air Injection (AIR) Solenoid Valve -N112-
- Component location: Below intake manifold
22. Charge air cooler
- With Charge Air Pressure Sensor -G31-
23. Recirculating valve for turbocharger -N249-
- Component location: Below intake manifold
24. Vacuum diaphragm for boost pressure regulation
- When the combination valve is opened, the mechanical boost pressure regulation valve in the turbocharger is opened and secondary air is thereby channeled past the turbocharger directly to the catalytic converter