Heating and A/C Unit, Disassembling and Assembling

Heating And A/C Unit, Disassembling And Assembling

- Removing add-on components from air conditioner
- Removing heater elements and air guides from air conditioner







1. Bolt
2. Intake housing
- Do not disassemble further
- With recirculated-air flap and two air flow/fresh-air flaps

3. Bracket
- For evaporator refrigerant lines

4. Air guide
- Consists of top and bottom section

5. Evaporator
- Check for complete insulation at refrigerant lines
- Installing seal to evaporator
- Check type of seal at connections and refrigerant lines (must be designed for same type of seal)
- The evaporator removed contains refrigerant oil which has to be returned to the refrigerant circuit Refrigerant R134a Servicing

6. Evaporator seal
- Installing seal to evaporator

7. Air distributor housing
- Not to be disassembled
- With temperature flaps and air distributor flaps
- The coupling elements in the air distributor housing between temperature flaps 1 and temperature flaps 2 are visible after removing the air distributor housing.

8. Footwell vents, front