Adaptation In Various Adaptation Channels (Except Adaptation Channels "08" and "81" ), Performing
Adaptation In Various Adaptation Channels (except Adaptation Channels "08" And "81" ), Performing
- Check DTC memory of operating and display module, Climatronic Control Module J255 and eliminate any faults displayed. Displaying & Reading Trouble Codes
- Check coding of operating and display module, Climatronic Control Module J255 for vehicle-specific optional extras and correct if necessary
Indicated on display of Diagnostic Operation System VAS 5051A
- Select function "10 - Adaptation".
Indicated on display of Diagnostic Operation System VAS 5051A
- Prompt for entering channel number appears in display zone -1 -.
- Input keypad appears in display zone - 2 -.
- Use input keypad to enter desired channel number in display zone - 2 - and confirm by touching Q key. Overview of Designated Adaptation Channels
NOTE:
- Possible causes if display zone -1 - indicates "Function unknown or cannot be implemented at present":
- Control unit adaptation not performed as specified and in full
- Malfunction on CAN-Bus comfort system
Indicated on display of Diagnostic Operation System VAS 5051A :
- Display field -1 - indicates "Channel X reading and testing".
- Currently set value for this function appears in area - 2 -.
- Area - 3 - displays bar with code number for currently valid setting.
- Bar can be used to alter setting within specified limits.
NOTE:
- Code numbers entered via bar which are not within specified limits are displayed but not implemented.
- If code number entered via bar is too high or too low, display is automatically reset.
- New value set for this adaptation channel appears in area - 2 -.
Entry can also be made by way of keypad.
- Touch key - 4 - (for entry via keypad).
Indicated on display of Diagnostic Operation System VAS 5051A :
- Display field -1 - indicates "Enter adaptation value: 0 to XXXXX".
- Input keypad appears in display zone - 2 -.
- Use input keypad to enter the desired value for this adaptation channel in the display zone(list of available adaptation channels) for re-adaptation of the operating and display module, Climatronic Control Module J255. Overview of Designated Adaptation Channels
NOTE:
- Code numbers entered via keypad which are not within specified limits are displayed but not implemented.
- If code number entered via keypad is too high or too low, display is automatically reset.
- Code number entered appears in area - 2 -.
- Confirm entry by touching "Q key".
Indicated on display of Diagnostic Operation System VAS 5051A
- New value for this adaptation channel appears in area - 2 -.
- Code number entered appears above bar in area - 3 -.
- Store entry by touching key - 5 -.
Indicated on display of Diagnostic Operation System VAS 5051A
- Display field -1 - indicates "Store channel X".
- New value for this adaptation channel appears in area - 2 -.
- Original and new code number for this adaptation channel appear in area - 3
- Adopt and store entry by touching key - 4 -.
- Display field -1 - indicates "Store channel X, value 0 to XXXX stored".
NOTE:
- Code numbers entered which are not within specified limits are displayed but not implemented.
- If code number entered is too high or too low, display is automatically reset.
- Touch <- key to return to selection program.
- Terminate On Board Diagnostic (OBD), and switch off ignition. End Output (Function 06)
- Check function of new adaptation entered.