Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2005 >> A4 Cabriolet (8H7) L4-1.8L Turbo (AMB) >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Relay Box >> Service and Repair >> 4-Way Relay Carrier, Removing and Installing

4-Way Relay Carrier, Removing and Installing



4-way Relay Carrier, Removing And Installing

Removing
- Remove driver's storage compartment:







- Remove bolts -1- for fuse box -2-.
- Remove fuse box from center tube for instrument panel.
- Detach wiring harness on center tube for instrument panel and set aside.
- Remove relay or control modules from 4-way relay carrier.







- Mark cables at screw connections -2-, -3- and -5-.
- Remove cables from screw connections.
- Remove bolt -1- and nut -4-.
- Unclip fuse carrier at 4-way relay carrier.
- Remove relays, control modules, and then unclip respective relay carrier.







NOTE: Check the exact assignment of 4-way relay carrier in the current wiring diagram.

Installing
Installation is reverse of removal, paying attention to the following:







- Attach cables to screw connections -2-, -3- and -5- according to markings.

Tightening torques

Component Nm
4-way relay carrier to body 2.4
Screw connections for electrical cables 9
pro multis · About Operation CHARM