Operating Switch on Multi-Function Steering Wheel, Removing and Installing

Operating Switch On Multi-function Steering Wheel, Removing And Installing

Removing
- Remove driver's side airbag unit.







- Remove bolts -3-.
- Unplug the connector -4-.
- Slide operating switch -1- out of airbag unit -2- toward front.

Installing
Installation is the reverse of removal, paying attention to the following:

NOTE: When installing, make sure the connecting wires of connector -4- are reinserted into the guides.

- Tighten bolts -3- of operating switch to 1.1 Nm.