Selector Shaft, Cleaning

Selector shaft, cleaning, 01J, CVT A/T FWD

Note:
- Observe rules for cleanliness when working on automatic transmission.
- General repair notes.

Work procedure
- Remove Transmission Control Module (TCM) J217.





- Clean selector shaft detent -arrow- of selector shaft. Use lint-free cloths only. Remove metal parts or similar very carefully from contact surfaces of magnets.

Note:
^ Make sure that spring -A- and roller -B- are properly secured.





- Clean sensors -A-, -C- and -D- of dirt and metal shavings, if necessary.
- Install Transmission Control Module (TCM) J217.