Window Regulator Switch, Removing and Installing

Window Regulator Switch, Removing And Installing

NOTE:
- The driver's side window regulator switch is depicted in the illustration.
- Passenger's side window regulator switch is removed in the same manner.

Removing







- Position a flat screwdriver at the armrest hole as depicted in the illustration.
- Press back retaining tab of window regulator switch -arrow- and remove switch upward from armrest.
- Disconnect connector.







- Carefully release catches -arrows- using a small screwdriver.
- Remove window regulator switch -1- downward from switch mount -2-.

Installing
Installation is reverse of removal, paying attention to the following:
- Press window regulator switch into switch mount until catches engage.