Floor Covering, Assembly Overview

Floor Covering, Assembly Overview







1 - Floor mat
- Removing
- Remove front seats.
- Remove rear seat backrest.
- Remove rear bench seat.
- Remove sill panel trims.
- Remove lower A-pillar trims.
- Remove foot rest.
- Remove foot rest holder.
- Remove center console.
- Detach wiring harness under center console.
- Remove bolts (2x) at air ducts - 2 - (2x) and remove both air ducts - 2 - (2x).
- Unscrew bolts - 3 - (2x).
- Fold floor mat - 1 - length ways and remove floor mat - 1 - from vehicle.
- Installing

NOTE: Floor covering is liable to tear slightly at cut-outs Install floor mat carefully.

- Install floor mat - 1 - in reverse order of removal.
2 - Air ducts (2x)
3 - Bolts (2x)