Outside Rear View Mirror, Assembly Overview

Outside Rear View Mirror, Assembly Overview







1. Mirror glass
- Use special tool 80-200 (pry bar) to unclip mirror glass.
- Protect top and bottom of mirror housing from damage with fabric-backed adhesive tape.
- Pry off mirror glass at the bottom first, then at the top.
- To install, enter mirror glass into guide stud and friction finger into friction spring, and press on.
- Always use protective gloves, and only exert pressure at center of glass.

2. Connector for heated mirror







3. Mirror adjuster unit
4. Positioning motor

5. Mirror housing
- Can be removed from door without disassembling entire rear-view mirror

6. Connector
- Clip into the mirror glass on the reverse side.