Rear Seat Backrest, Assembly Overview

Rear Seat Backrest, Assembly Overview







1. Rear seat backrest
- Removing
- Remove rear bench seat.
- Remove head restraints.
- Remove head restraint guides.
- Open convertible top compartment to gain access to belt guides of rear seat belts.
- Disengage seatbelt guides (2x) at left and right.
- Remove center armrest.
- Remove cord at fabric cover of belt buckles
- Remove bolts - 2 - (2x).
- Remove rear seat backrest - 1 -.
- With seat heating: Disconnect connector for seat heating.
- Installing
- With seat heating: Connect connector for seat heating. Guide rear seat backrest - 1 - in at bottom.
- Push rear seat backrest - 1 - upward and engage rear seat backrest - 1 - at top (3x).
- Press rear seat backrest - 1 - fully down.
- Install bolts - 2 - (2x).
- Install head restraint guides.
- Install head restraints.

2. Bolts (2x)
- Tightening torque 8 Nm







Cord at fabric cover of belt buckles, removing and installing
- Removing
- Remove cord - 2 - in direction of - arrow -.
- Installing
- Slide cord - 2 - in opposite direction of - arrow - into grip channel - 1 -.