Axle Nut

Note:
^ The wheels must not touch the ground when initially tightening the bolt securing the outer drive shaft joint; otherwise the wheel bearing can be damaged.

For the next step a second mechanic is required.
- 1st mechanic gets into vehicle and presses brake pedal.
- 2nd mechanic tightens hex bolt for drive axle to initial torque.
Hex bolt (M14): 115 Nm
Hex bolt (M16): 200 Nm
- Install wheel and lower vehicle to the ground.
- Turn bolt securing drive axle an additional 180° (1/2 turn)

CAUTION: (Only turn the bolt through this additional angle when the vehicle is standing on wheels: risk of accident)