Campaign - Spark Plug Replacement
Group: 28Number: 05-01
Date: Jun. 17, 2005
Subject:
Spark Plugs, Replacing (IF)
Model(s):
A4 with 3.0L (Eng. code BGN) 2005 --> (see VIN Below)
Cabriolet 3.0L (Eng. code BGN) 2005 --> (see VIN Below)
Instructions:
Perform this procedure on all applicable vehicles within the Limited New Vehicle Warranty
Tip:
This Technical Bulletin is in effect for 15 months from date of publication as listed above. After that date, this Technical Bulletin will expire and no longer be in effect.
Condition
Spark Plugs with Part No: 101 905 610
(Vendor: Bosch) require replacement.
Production
Affects only the vehicles within the VIN ranges shown.
Service Requirements:
Vehicle must meet ALL of the following criteria.
1 - Procedure is valid only for vehicles that show the IF code in the OTIS View Campaign inquiry screen on the day of repair.
2 - Vehicle must be within the Limited New Vehicle Warranty.
3 - Procedure must be performed within the allotted time frame stated in this Technical Bulletin.
Tip:
Procedure must also be performed on applicable vehicles in Dealer inventory
Procedure:
- Replace all Spark Plugs with Part No:
101 905 610.
Use ONLY Part No: 101 905 611 (Vendor:
NGK) as a Replacement Spark Plug.
If Spark Plugs 101 905 611 (Vendor: NGK) are already installed:
DO NOT replace.
Tip:
See Repair Manual for the vehicle you are working on.
Part numbers listed in this bulletin are for reference only. Always check with your Parts Dept. for the latest parts information.
Required Vehicle Update Technical Bulletin Time Requirements/Reimbursement
To ensure prompt and proper payment, be sure to enter, immediately upon completion of the repair work, the applicable reimbursement code listed below.
Claims will only be paid for vehicles that show the "IF" code in the OTIS View Campaign inquiry screen on the day of repair.
"IF" Data Entry Procedure Use Claim Type RC
The system automatically enters parts and labor applicable to the above listed code. For vehicles that, according to your information, cannot be corrected or reached, and one of the codes below best describe the reason, please enter one of the applicable codes into the system:
^ IF 20 Customer Refused Repairs
^ IF 30 Total Loss
^ IF 40 Vehicle Stolen
^ IF 50 Vehicle Exported
Additional Required Vehicle Update Technical Bulletins
Some of the affected vehicles may be involved in additional Required Vehicle Update Technical Bulletins. Please check your OTIS View Campaign inquiry screen so that any additional required work can be done simultaneously.
Required Vehicle Update Technical Bulletin Verification
For verification, always check the OTIS View Campaign inquiry screen. The OTIS system is the only binding inquiry and verification system; other systems are not valid and may result in non-payment of a claim.
Help for Claim Input
For questions regarding claim input, contact your appropriate Warranty Claim specialist.
Please do not contact the Campaign Helpline regarding claim input.
Required Customer Notification
Inform your customer in writing by recording on the Repair Order any and all work that was conducted on the vehicle, including any and all updates completed under this Technical Bulletin.