Shift Interlock: Testing and Inspection

Ignition key removal lock, checking, 01J, CVT A/T FWD
- Turn ignition key to ignition on position.
- Press brake pedal and hold.
^ It must be possible to shift selector lever out of position "P" without resistance while locking button on selector lever handle is pressed.
- Switch ignition off.
^ It should not be possible to remove ignition key with selector lever in any position other than P.
- Place selector lever in position "P".
^ It must be possible to move ignition key into removal position without sticking.
- Remove ignition key.
^ It must be possible to remove ignition key only in position P.
^ Selector lever cannot be shifted out of position "P" with the locking button pressed and foot brake depressed.