Microswitch For Headrest, Adjusting

Microswitch For Headrest, Adjusting

NOTE: For vehicles up to 05.02, VIN: 8H 3K 002 450: To prevent malfunctions of headrest and seatback adjustment, apply a cable tie - 1 -.






1. Cable tie
2. Connector
3. Circlip
4. Circlip
- Adjusting and checking function
- Remove backrest panel.
- Use a screwdriver to pry out circlip - 3 -.
- Slide microswitch - 4 - only far enough so that headrest is moved downward and switched off when release lever is lifted 1/3.
- Check function of headrest at adjustment switch:
- Headrest is not activated when backrest release lever is lifted to 1/3.
- Headrest is activated when release lever is in rest position.
- Correct the position of microswitch - 4 - as necessary and check its function again.

5. Catches (2x)