Front Door Window Glass: Adjustments

Door window, adjusting

Special tools, testers and auxiliary items required
- Masking tape







Window immersion depth, determining
- Close convertible top.
- Raise window.
- Tape masking tape - arrows - overlapping on window with door open.
- Close door completely.
- Dimension - a - = 80 mm.
- Dimension - b - = 40 mm.







NOTE: Raise convertible top fabric - 1 - in place.

- Apply a marking-arrow-to making tape at front and back directly below roof frame seal.
- Open door.
- Measure distance between marking and upper end of window.
- Front immersion depth: max.5 mm.
- Rear immersion depth: max.7 mm.







Window immersion depth, adjusting
- Lower window.
- Remove front and rear rubber stops - arrow - at bottom of door.
- Insert a thin 5 mm hex socket head wrench through opening on door.
- Door seal - 1 - does not need to be removed to insert hex socket head wrench.
- Adjust front and rear window immersion depth by evenly turning both lifting units.
- Turn right = greater immersion depth.
- 1 turn corresponds to approx. 1.2 mm.
- Seal off openings with rubber plugs.
- Raise window and measure change.
- Ensure window is parallel to side window, adjust if necessary.