Wiring Harness For Backrest, Removing and Installing

Wiring Harness For Backrest, Removing And Installing

Special tools, testers and auxiliary items required







- Engine and transmission holder VAS 6095







- Fixture for seat repair VAS 6136







1 - Connector (3x)
2 - Cable harness

- Removal:
- Remove seat.
- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
- Attach the front seat to the fixture for seat repair VAS 6136.
- Remove side trim on sill side.
- Remove side trim on tunnel side.
- Remove the backrest.
- Remove backrest cover panel.
- Remove cover and padding from backrest.
- Remove cable ties - 3 - (3x).
- Remove connectors - 1 - (3x).
- Remove wiring harness - 2 -.

- Installing:
Installation is reverse of removal.
3 - Cable ties (3x)