Measured Value Block, Reading

Measured Value Block, reading, 01V, 5 Spd. A/T AWD

CAUTION: Please observe safety precautions.

Test procedure
- Connect VAS 5051 Vehicle Diagnosis, Measurement- and Information System. Ignition must be switched ON.
or, depending on the desired operation:
- Start engine.





Display on VAS 5051:
- In selection touch -1- diagnostic function "08 - Read Measured Value Block".





Display on VAS 5051:
1 - Enter display group
- On key pad -2- enter desired 3-digit display group number go to List of Display Groups, and confirm entry by touching Q-button. List of Selectable Display Group Numbers

Example:
- Enter "001" for Display group number 001" and confirm by touching Q button.





Display on VAS 5051:
1 - Read Measured Value Block
2 - Display field 1
Display field 2
Display field 3
Display field 4
3 - Display Group X

Note:
^ If a display field is not being used, there will be no display.
^ To switch to another display field, proceed as follows:





- End function "08 - Read Measured Value Block" by touching [] button.