Selector Mechanism Components, Assembly Overview

Selector mechanism components, assembly overview, 02X, 6 Spd. M/T AWD

Part I

Note:
^ Lubricate all bearings and moving surfaces with polycarbamide grease G052142A2.





1 - Ball
2 - Rubber ring
3 - Ball guide
4 - Rubber ring
5 - Washer
6 - Circlip
^ Take out before removing ball

7 - Spring
8 - Spacer sleeve
9 - Washer
10 - Circlip
11 - Sound insulation
^ - Arrow - marked on sound insulation points in direction of travel

12 - Gear lever knob
^ With cover
^ Removing and installing

13 - Nut, 10 Nm
14 - Ball housing
15 - Torx socket head bolt
16 - Gear lever
^ Bend points toward rear

17 - Bolt
18 - Nut, 10 Nm
19 - Selector housing
20 - Joint for gear lever/selector rod
21 - Nut - 10 Nm
^ Self-locking
^ Replace

22 - Bushing

Part II

Note:
^ Lubricate all bearings and moving surfaces with polycarbamide grease G052142A2.





1 - Boot
^ Secure to selector rod with commercially available instant adhesive

2 - Washer
3 - Ball socket
4 - Cap nut, 23 Nm
5 - Ball stud
6 - Ball socket
7 - Connecting rod
8 - Bushing
9 - Bushing
10 - Bolt, 23 Nm
11 - Sleeve
12 - Retaining clip
13 - Bolt, 40 Nm
14 - Push rod
^ With bushing, bolt and washers

15 - Hex socket head bolt, 23 Nm
16 - Washer
17 - Ball housing
18 - Clamping ring for boot
19 - Boot
20 - Hex socket head bolt, 23 Nm
21 - Clamp
22 - Selector rod
23 - Joint for gear lever/selector rod
24 - Cap nut, 10 Nm
^ Self-locking
^ Replace

25 - Selector shaft lever