Diagram 62/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Load Reduction Relay, Vehicle Electrical System Control Module, Headlamp Washer Pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake Lamp Switch ABS/Electronic Stabilization Program Overview

J59 - Load Reduction Relay

J519 - Vehicle Electrical System Control Module

T10b - 10-Pin Connector, black, on vehicle Electrical System Control Module

T17b - 17-Pin Connector, green, connector station A-pillar, left

T23 - 23-Pin Connector, black, on vehicle Electrical System Control Module

T32b - 32-Pin Connector, grey, on vehicle Electrical System Control Module

V11 - Headlamp Washer Pump

(81) - Ground Connection 1 (in instrument panel wiring harness)

(135) - Ground connection -2-, in instrument panel wiring harness

(179) - Ground Connection (in left headlamp wiring harness)

(A18) - wire connection (54), in instrument panel wiring harness

(A34) - Wire connection (75x), in instrument panel wiring harness

(A57) - Plus connection -2- (30), in instrument panel wiring harness

* - Where applicable. Headlamp washer pump protected by Fuse S237

Previous Diagram 62/12 (Tracks 141-154)

Next Diagram 62/14 (Tracks 169-182)