Trunk Lock/Alarm/Central Locking Switch F124 - Through 10.04, Removing and Installing

Trunk Lock/Alarm/Central Locking Switch F124 - Sedan Through 10.04, Removing And Installing

Removing
- Remove rear lid lock.







- Use flat screwdriver to pry plastic tab - 3 - from retaining pins -1 -.
- Fold plastic tab completely to rear.
- First pull contact switch - 2 - to one side and then upwards out of lock for rear lid.

Installing
Install in reverse order of removal, noting the following:

NOTE: Ensure washers are properly positioned between plastic tab and lock for rear lid.

- Install rear lid lock.