Diagram 37/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Control module for operating electronics, navigation





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F4 - Back-Up Light Switch Manual Transmission

J104 - ABS Control Module (w/EDL)

J393 - Central control module for comfort system Convenience System Overview

J402 - Control module for operating electronics, navigation Navigation System II-D Component Locations

T8 - 8-Pin Connector, black, radio connector III

T17 - 17-Pin Connector, black, connector station A-pillar, left

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

T20d - 20-Pin Connector, black, radio connector I

T20g - 20-Pin Connector, red, on central control module for comfort system (used to be Connector 4)

T26 - 26-Pin Connector, black, on Control Module for operating electronics, navigation

(A87) - Wire connection (RF), in instrument panel wiring harness

(A129) - Wire connection (quiet switch), in instrument panel wiring harness

(A133) - Left ABS Impulse Connection (in instrument panel wiring harness)

(V49) - Low Frequency + Connection (in communication wiring harness)

(V50) - Low Frequency - Connection (in communication wiring harness)

* - see applicable Telephone wiring diagram

** - with alarm system only

Previous Diagram 37/2 (Tracks 1-14)

Next Diagram 37/4 (Tracks 29-42)