Fog/Driving Lamp: Service and Repair

Fog Lamp Housing, Removing And Installing - Through 10.04

Removing
- Turn light switch to position "O".

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

Audi A4:







- Release retaining hooks -1... 4 - using a screwdriver - arrow - and pull off air intake grille in bottom section of bumper.

Audi S4:







- Turn screw -1 - 90 degrees (1/4 turn).
- Remove air intake grille from fog lamp housing in direction of - arrow A -.
- Then push air intake grille in direction of - arrow B - and simultaneously disengage retaining clip - 2 -.
- Remove air intake grille.







All models:
- Remove screws - arrows -.
- Disengage fog lamp housing and remove.
- Disconnect electrical connection.

Installing
Install in reverse order of removal, noting the following:
- Engage fog lamp housing.
- Check and adjust fog lamps if necessary.

Tightening torque

Component - fastener Nm
Fog lamp housing to bumper - screw 5