Display Group 013

Display Group "013"

Activation for Fresh Air Blower V2 and calculated Fresh Air Blower speed, voltage transmitted by Instrument Cluster Control Module J285 at terminals "58d" and "58s" (in %)

Display Field 1 - 2:

- To improve voice recognition and the clarity of telephone voice input, the Fresh Air Blower speed is reduced on vehicles as of Model Year 2002 (with operating and display module, Climatronic Control Module J255 as of hardware/software version "0711" ). The following applies:
- The reduction takes effect as soon as the message "Telephone voice input" is transmitted via the CAN-Bus comfort system.
- The reduction time is limited to max. 2 minutes.
- The amount by which the Fresh Air Blower speed is reduced depends on the air outflow direction and the Fresh Air Blower speed when the "Telephone voice input" signal is received. The greater the proportion of air routed to the instrument panel vents, the more the speed is reduced.
- In the basic setting, the Fresh Air Blower speed with 100% air to the instrument panel vents is limited to 15 % of the maximum Fresh Air Blower speed. This restriction can be reduced or cancelled via the "Adaptation" function in adaptation channel "8". Adaptation (Function 10)

NOTE:
- The Fresh Air Blower Control Module J126 is integrated into the Fresh Air Blower V2 and cannot be replaced separately at present.
- Activation for the Fresh Air Blower V2 is calculated by the operating and display module, Climatronic Control Module J255 on the basis of the measured temperatures and the settings made.
- The Fresh Air Blower speed is transmitted by the Fresh Air Blower Control Module J126 to the operating and display module, Climatronic Control Module J255.

Display Field 3 - 4: