Antenna Splitter R87 - Avant, Removing and Installing

Antenna Splitter R87 - Avant, Removing And Installing

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

Removing:
- Remove A-pillar trim.
- Remove front passengers seat.

NOTE: Seat belt need not be removed from seat frame.

- Pull back floor carpet.







- Release cover for electronics box - arrows - and remove.







- Open lid - 1 - of mounting box - 2 - in direction of - arrow -.
- Disconnect antenna cable connections and remove splitter.

Installing:
Install in reverse order of removal, noting the following:

NOTE:
- Ensure correct seating and fit of electrical connections.
- Antenna connections (couplings) must be properly aligned and tight to ensure proper reception.