Lid Lock and Handle Mechanism, Removing and Installing

Lid Lock And Handle Mechanism, Removing And Installing







1. Rear lid lock
- To remove, unclip operating rod from swivelling bush and disengage.
- Unscrew hex nuts - 3 - and remove rear lid lock.

2. Swivelling bushing
- After installing rear lid lock, engage operating rod and secure.

3. Nut
- 8 Nm
4. Operating rod
5. Bowden cable

6. Lock cylinder
- Removing
- Disconnect electrical harness connectors.
- Disengage Bowden cable - 6 - from lock cylinder.
- Remove combination bolt - 7 -.
- Twist lock cylinder 90 degrees.
- Remove lock cylinder from handle mechanism.

7. Combination bolt
- 8 Nm.

8. Engine

9. Grip piece
- Removing:
- Rear lid trim removed.
- Lock cylinder removed.
- Remove hex head collar nuts - 10 -.
- Press in catches - arrows -.
- Remove grip piece.

10. Hex head collar nut
- 8 Nm