Navigation Control Head In Center Console, Removing and Installing

Navigation Control Head In Center Console, Removing And Installing - Vehicles Up To 10.04

Special tools, testers and auxiliary items required







- Torque Wrench V.A.G 1783







1. Navigation control head
- Removing:
- Remove center console
- Turn center console - 4 - around.
- Remove two bolts - 3 - on navigation control head - 1 -.
- Disconnect harness connector - 2 -.
- Remove navigation control head - 1 - from recess - 5 -.

- Installation:
- Installation is performed in the reverse order of removal.

2. Connector

3. Bolts (2x)
- Tightening torque 2 Nm

4. Center console
5. Recess