Fuse Panel, Removing and Installing

Fuse Panel, Removing And Installing

Removing
- Disconnect battery.
- Where applicable, remove drivers storage compartment.







- Remove screws -1 - for fuse panel - 2 -.
- Release upper an d lower retaining clips and detach fuse panel from central tube for instrument panel.
- Disengage wiring harness at central tube for instrument panel and set aside.







- Cut open cable tie -1 -.
- Release cover for fuse panel - arrows-.
- Remove fuses at fuse panel.







- Remove retaining strip for connectors - arrows - and take connectors out of fuse panel.
- Unclip socket -1 -.







NOTE: Refer to the applicable wiring diagram for exact identification of connections on fuse box Wiring Diagrams

Installing
Install in reverse order of removal, noting the following:
- Install drivers storage compartment.
- Reconnect battery.

Tightening torque

Component - fastener Nm
Fuse carrier to central tube for 3
instrument panel - screw