Input Shaft, Drive Pinion, Hollow Shaft and Shift Lever Mechanism In Transmission, Removing and Installing

Input shaft, drive pinion, hollow shaft and shift lever mechanism in transmission, removing and installing, 01E, 6 Spd. M/T AWD





1 - Bearing plate
^ Servicing

2 - Selector rod for 5th and 6th gear
^ Only replace complete with follower for 5th and 6th gear, Item 6

3 - Follower for reverse gear
^ Pulling out ball housing, go to Fig. 3
^ Driving in ball housing, go to Fig. 4

4 - Selector fork, 3rd and 4th gear
^ Can be replaced separately.
^ Installation position: Rib toward follower





5 - Selector rod for 3rd and 4th gear
^ Only replace complete with follower for 3rd and 4th gear

6 - Input shaft
^ Disassembling and assembling

7 - Follower for 1st and 2nd gear
^ Can be replaced separately.

8 - Circlip
^ 2 pieces

9 - Selector rod for 1st and 2nd gear
^ Only replace complete with pinned selector fork for 1st and 2nd gear

10 - Hollow shaft
^ Disassembling and assembling





11 - Pinion shaft
^ Disassembling and assembling

12 - Locking bolt, 50 Nm
^ 4 pieces
^ Insert with sealing paste AMV 188 001 02