Gearsets, Adjusting and Marking

Gearsets, adjusting and marking, 01E, 6 Spd. M/T AWD





1 - Marking "K831" indicates Klingelnberg final drive set with transmission ratio 31 : 8.
2 - Gear set pairing number (312).
3 - Deviation (tolerance) r is based on the test machine master gauge used in production. The deviation r is always given in 1/100 mm. Example: 25 means r = 0.25 mm
Ro -Length of test machine master gauge used. Ro = 59.65 mm





R - Actual dimension between ring gear and face of pinion shaft at point with quietest running for this pinion set.
Vo - Hypoid offset