Transmission Vehicle Speed Sensor (VSS) -G38-, Removing and Installing

Transmission Vehicle Speed Sensor (VSS) -G38-, removing and installing, 01V, 5 Spd. A/T AWD
Also referred to as Sender for transmission output RPM -G195-.

Removing
- Removing oil pan.





- Disconnect harness connector from Transmission Vehicle Speed Sensor (VSS) -G38- (arrow).





- Remove Transmission Vehicle Speed Sensor (VSS) -2-.

Installing





- Install and tighten Transmission Vehicle Speed Sensor (VSS) -2- using spacer sleeve -1- (height: 8 mm) to 6 Nm.





- Connect connector at Transmission Vehicle Speed Sensor (VSS) -G38-.
- Installing oil pan.
- Fill up ATF.