Cooling System Components, Removing and Installing

Cooling system components, removing and installing

CAUTION: Cover cap of expansion tank with rag and open carefully, as hot steam or hot coolant may escape when opening.

Note:
^ When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work.
^ Secure all hose connections using hose clamps appropriate for the model type.
^ Hose clip pliers V.A.G 1921 or spring-type clip pliers VAS 5024 A are recommended for installing spring-type clamps.
^ Always replace gaskets and seals.
^ Arrows on coolant lines and coolant hoses must line up across from each other.