02X, 6 SPD. M/T AWD

Transmission oil level, checking, 02X, 6 Spd. M/T AWD

Special tools, testers and auxiliary items required

Torque wrench V.A.G 1331:

Note:
^ The vehicle must be horizontal when checking gear oil level.





- To check gear oil level, remove oil filler plug - arrow -.





- The oil level is correct when transmission is filled up to edge of housing - arrow -.
- Top off with gear oil if necessary.
- Install oil filler plug and tighten.





Note the following when filling with new oil:
- Remove oil filler plug - arrow -.





- Fill with gear oil up to edge of housing - arrow -.
- Install oil filler plug.
- Start engine, engage a gear and allow transmission to turn for approximately 2 minutes.
- Switch off engine and remove oil filler plug.
Once more, fill with gear oil up to edge of housing - arrow -.
- Install oil filler plug and tighten.

Tightening torque: