Adjustment Dimensions For Rear Lid

Adjustment Dimensions For Rear Lid

Special tools, testers and auxiliary items required







- Adjusting gauge 3371

Panel gap dimensions







- Dimension - A - = 4 mm
- Dimension - B - = 4.5 mm
- Dimension - C - = 1.75 mm

Gap dimensions for fuel filler flap
- Dimension - D - = 3 mm
- Dimension - E - = 3 mm
- Dimension - F - = 3.5 mm
- Dimension - G - = 3 mm







- Position rear lid in chassis cut-out just so that the gap measurement on the right equals the gap measurement on the left.
- Check whether chassis surface below rear window stands flush with chassis surface of lower side panel - arrows a -.
- Check whether rear lid is flush with roof (and projects slightly upward).

- Dimension - b - = 0 to 0.5 mm