Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2005 >> A4 Quattro Wagon (8E5) V6-3.0L (BGN) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> Multi-Function Transmission Range (TR) Switch -F125-, Removing and Installing

Multi-Function Transmission Range (TR) Switch -F125-, Removing and Installing



Multi-Function Transmission Range (TR) Switch -F125-, removing and installing, 01V, 5 Spd. A/T AWD

Removing
- Removing left transmission support.
- Unbolt Multi-Function Transmission Range (TR) Switch -F125- from transmission and pull off from shift rod.

Installing





- Connect Multi-Function Transmission Range (TR) Switch -F125- to shift rod. Flap part at splines in switch -3- must align with flat part of shift rod -1-

Note: Set Multi-Function Transmission Range (TR) Switch -F125- onto shift rod in centered manner Do not cant and do not set with force. Risk of damage at switch terminals.





- Rotate switch until the alignment bore -4- at switch housing can be fitted on the alignment pin -2- at transmission housing.
- Installing left transmission support.

Tightening torques:




pro multis · About Operation CHARM