Overview of Designated Adaptation Channels

Overview Of Designated Adaptation Channels

NOTE:
- Adaptation channels "01", "02", "06" and "07" are in effect only for vehicles in which the auxiliary heater is installed as optional equipment. Since the auxiliary heater is not available in the USA, these adaptations are to be disregarded in the USA.
- Adaptation channels "08", "09" and "81" are only provided for operating and display modules, Climatronic Control Module J255 as of hardware/software version "0711".
- Adaptation channels "10" to "16" are only provided for operating and display modules, Climatronic Control Module J255 as of hardware/software version "1323" (gradual introduction at the factory as of 09.03).
- Adaptation channels "17" to "19", "21" to "80" and "82" onwards are not used at present.
- Adaptation channel "20" is only used with operating and display modules, Climatronic Control Module J255 with part number index "AJ" onwards (intended for resetting of all altered settings to factory adaptation). Such operating and display modules, Climatronic Control Module J255 are installed on vehicles as of VIN 400000 in Model Year 2005 (Saloon and Avant; gradual introduction for the Cabrio in week 46/04 without prior specification of any particular VIN).
- If the setting entered in adaptation channel "03" is "0", a note must be made in the vehicle documentation to the effect that the A/C Compressor Regulator Valve N280 can no longer be deactivated by the engine control module via the "air conditioner compressor shutoff" function.