01E, 6 SPD. M/T AWD

Clutch with SAC pressure plate, 01E, 6 Spd. M/T AWD





1 - Dual-mass flywheel

3 - Bolt for flywheel
^ Always replace
^ Screw length 43 mm 60 Nm plus additional 180° turn
^ Screw length 22.5 mm 60 Nm plus additional 90° turn

4 - Clutch plate
^ Installation position:
^ Clutch lining must make full contact with flywheel
^ Marking "Getriebeseite" (if present) goes toward pressure plate and transmission
^ Spring pack (coil springs) toward pressure plate and transmission
^ Clutch plate diameter

5 - SAC pressure plate

6 - Bolt, 25 Nm
^ Tighten in small stages and in diagonal sequence