Right and Left Transmission Mounts, Removing and Installing

Right and left transmission mounts, removing and installing, 01V, 5 SPD. A/T AWD

Special Tools And Equipment:

^ 3282 transmission support
^ 3282/19 adjustment plate
^ Engine/transmission support V.A.G 1383A engine/gearbox jack

Removing

Note: Transmission must be supported as indicated when both transmission supports are removed. Transmission does not need to be supported this way when only one of the transmission supports is being removed.





- Prepare 3282 transmission support for Automatic Transmission 01V with 3282/10 adjustment plate and place it on the V.A.G 1383A engine/transmission hoist.

Note: The symbols on the adjustment plate indicate the necessary mounts for Automatic Transmission 01V and the arrow points toward front of vehicle.





- Roll V.A.G 1383A engine/transmission hoist with 3282 transmission support under transmission, align adjustment plate parallel to transmission and support transmission.
- Secure transmission on 3282 transmission support using bolt -A-.

Note: If 3282 transmission support is not available, transmission can be supported using the V.A.G 1383A transmission lift and the 1359/2 universal mount

Right transmission support





- Remove bolts -B-.
- Remove heat shield -C-.
- Remove right heat shield -D- by removing bolts -A- from transmission.

Left transmission support





- Remove bolts -B-.
- Remove heat shield -C-.

Note: The left heat shield is not installed on 4 cylinder gasoline engines.

- Remove left heat shield -D- by removing bolts -A- from transmission.

Left and right transmission supports
- Unscrew nuts -A- on subframe.





- Remove transmission supports -E-.

Note: Items -C- and -B- are not installed on vehicles with hydraulic transmission bearing -H-, because bolt -G- is threaded directly into the transmission bearing.

Installing
Installation is the reverse of removal.

Tightening torques for left and right transmission supports (part 1):

Tightening torques for left and right transmission supports (part 1):

Tightening torques for left transmission support (part 1):

Tightening torques for left transmission support (part 2):

Tightening torques for right transmission support (part 2):