Diagram 309/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


ABS Control Module (w/EDL), Steering -1- Angle Sensor, Sender for Rotation Rate, Valves, ABS Return Flow Pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G201 - Brake pressure sensor 1 ABS/Electronic Stabilization Program Overview

G202 - Sender for Rotation Rate ABS/Electronic Stabilization Program Overview

J104 - ABS Control Module (w/EDL)

N99 - Right Front ABS Inlet Valve

N100 - Right Front ABS Outlet Valve

N101 - Left Front ABS Inlet Valve

N102 - Left Front ABS Outlet Valve

N133 - Right Rear ABS Inlet Valve

N134 - Left Rear ABS Inlet Valve

N135 - Right Rear ABS Outlet Valve

N136 - Left Rear ABS Outlet Valve

N225 - Pilot valve -1- traction control

N226 - Pilot valve -2- traction control

N227 - High pressure switch valve -1- traction control

N228 - High pressure switch valve -2- traction control

T17b - 17-Pin Connector, green, connector station A-pillar, left

V39 - ABS Return Flow Pump

Previous Diagram 309/4 (Tracks 29-42)

Next Diagram 309/6 (Tracks 57-70)