(Vehicles With Automatic Transmission 09L)

Engine, securing to assembly stand

Special tools, testers and auxiliary items required:

^ Lifting tackle 2024 A
^ Engine and transmission holder VAS 6095 with adapter set VAS 6095/01-5
^ Shop crane VAS 6100
^ Lift arm extension for workshop crane VAS 6101

Work procedure
Engine separated from transmission.





- Hook engine sling 2024 A onto engine and onto workshop crane VAS 6100 with lift arm extension for workshop crane VAS 6101 as shown in illustration.

Note: To be aligned to the center of gravity of the engine assembly, the hole rails of the lifting hook must be inserted as shown in the illustration.

CAUTION: Lifting hooks and alignment pins on the engine sling must be secured with securing pins - arrows -.





- Disconnect electrical harness connector - 1 - at left engine mount.
- Remove bolts - arrows - and remove left engine mount.





- Secure engine on engine/transmission holder VAS 6095 with adapter set VAS 6095/01-5 as shown in illustration.