Sunroof System

Sunroof, Assembly Overview







1. Sunroof Motor
- Removing and installing
2. Combination nut
- 8 Nm
- Self-locking
- Replace
3. Front water drain hose
4. Compression spring
- For wind deflector
5. Wind deflector
6. Sunroof headliner
7. Trim
8. Screw
- 4.5 Nm
- Replace with locking compound
- Locking compound
9. Glass sunroof panel
- adjusting
10. Gasket
- For glass sunroof panel
11. Torx screw
- 1 Nm
12. Slider carrier plate

NOTE: Stops located on Rear slider carrier plate - 12 - are not shown in illustration. If stops are misplaced during removal/installation of sliding headliner, stops are available to order separately.

13. Torx screw
- 1 Nm
14. Rear slider
15. Frame
16. Rear water drain hose
17. Screw
- 8 Nm
- Self-locking
- Replace
18. Screw
- 3.5 Nm