Diagram 2/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Secondary Air Injection (AIR) Pump Relay, Electrohydraulic Engine Mounting Regulator Valve, Intake Manifold Tuning (IMT) Valve, Secondary Air Injection (AIR) Pump Motor, Leak Detection Pump (LDP)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J299 - Secondary Air Injection (AIR) Pump Relay Overview of Relay Carrier

J623 - Engine Control Module (ECM) Overview of Control Modules

N112 - Secondary Air Injection (AIR) Solenoid Valve 4.2L BVJ / BNK Overviews

N144 - Left Electrohydraulic Engine Mounting Regulator Valve

N145 - Right Electrohydraulic Engine Mounting Regulator Valve

N156 - Intake Manifold Tuning (IMT) Valve 4.2L BVJ / BNK Overviews

S130 - Secondary Air Injection (AIR) Pump Fuse Overview of Fuses

T17b - 17-Pin Connector, black, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

V101 - Secondary Air Injection (AIR) Pump Motor 4.2L BVJ / BNK Overviews

V144 - Leak Detection Pump (LDP) Locations

(614) - Ground Connection 2 (in engine compartment, right) Overview of Ground Connections in Front Part of Vehicle

(D103) - Connection 3 (in engine compartment wiring harness)

* - Models with leak detection pump (LDP)

** - Relay carrier electronics box in right plenum chamber

Previous Diagram 2/11 (Tracks 127-140)

Next Diagram 2/13 (Tracks 155-168)