Diagram 2/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Oil Pressure Warning Lamp, Engine Coolant Level/Temperature (ECL/ECT) Warning Lamp, Oil Pressure Switch, Engine Coolant Level (ECL) Warning Switch, Oil Level Thermal Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil Pressure Switch 4.2L BVJ / BNK Overviews

F66 - Engine Coolant Level (ECL) Warning Switch Locations

G266 - Oil Level Thermal Sensor 4.2L BVJ / BNK Overviews

J285 - Instrument Cluster Control Module Locations

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

K3 - Oil Pressure Warning Lamp

K28 - Engine Coolant Level/Temperature (ECL/ECT) Warning Lamp

SB4 - Fuse 4 (on fuse panel B) Overview of Fuses

T17a - 17-Pin Connector, red, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T17b - 17-Pin Connector, black, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T26a - 26-Pin Connector, black, on data bus on board diagnostic interface

T32 - 32-Pin Connector, grey, on instrument cluster

Y24 - Display Unit in Instrument Cluster

(85) - Ground Connection 1 (in engine compartment wiring harness)

(410) - Sensor Ground Connection 1 (in main wiring harness)

- CAN-Bus (data wire)

* - Through October 2005

** - From November 2005

Previous Diagram 2/15 (Tracks 183-196)