Clean Working Conditions

Clean Working Conditions

Even minor contamination can lead to malfunctions in the fuel injection system. Therefore when working on the fuel supply/injection system, pay careful attention to the following rules of cleanliness:

• Before loosening, connections and surrounding areas must be cleaned thoroughly with engine or brake cleaner, and then cleaned area must be dried completely.

• Plug open lines and connections immediately with appropriate protective caps.

• Place removed parts on a clean surface and cover them. Use lint-free cloths.

• Only install clean components: Remove the replacement parts from their packaging just prior to installing them. Do not use parts that have been stored unpacked (for example in tool boxes etc.).

• Carefully cover or plug unpacked components if repairs cannot be performed immediately.

• When the system is open: Do not work with compressed air. Do not move vehicle unless absolutely necessary.