Front Turn Signal Lamp Bulbs

Front Turn Signal Lamp Bulbs

• Adjust the headlamps after performing any work that could have affected their adjustment.

Removing

- Pry off cap - 1 - in front wheel house liner in direction of - arrow -.





• On vehicles without cap, the wheel house liner must be loosened in front area.

- Turn bulb socket counter-clockwise - arrow - and remove from housing.





- Release securing clip in direction of - arrow - and pull light bulb - 1 - out of socket - 2 -.





Installing

Install in reverse order of removal, observing the following:

- Insert the new bulb into the housing without touching the bulb with bare hands.

- The socket - 4 - can be installed into the headlamp housing - 3 - in only one position.





• The brace - 1 - on the socket must fit into the guide - 2 - on the headlamp housing - arrow -.

- Push cap into wheel house liner until it engages noticeably.