Safety Precautions

Safety Precautions

CAUTION!
Observe the following for all installations, especially in engine compartment due to lack of room:

• Route lines of all types (e.g. for fuel, hydraulic, EVAP canister system, coolant and refrigerant, brake fluid, vacuum) and electrical wiring so that the original path is followed.

• Watch for sufficient clearance to all moving or hot components.

If special testing equipment is required during road test, note the following:

CAUTION!
• Test equipment must always be secured to the rear seat and operated from there by a second person.

• If test and measuring equipment is operated from the passenger seat, the person seated there could be injured in the event of an accident involving deployment of the passenger-side airbag.

CAUTION!
The use of nails, paper clips, or another unauthorized materials to back-probe electrical harness connectors is strictly prohibited and may cause damage to the electrical harness connectors, terminal ends or damage to a component. Use only the manufacturers test lead kit or an equivalent aftermarket test lead kit for back-probing all electrical harness connectors.