Diagram 2/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Mass Air Flow (MAF) Sensor, Evaporative Emission (EVAP) Canister Purge Regulator Valve 1, Intake Manifold Change-Over Valve, Oxygen Sensors (O2S) Behind Three Way Catalytic Converter (TWC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G70 - Mass Air Flow (MAF) Sensor 4.2L BVJ / BNK Overviews

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations

G131 - Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) Locations

J623 - Engine Control Module (ECM) Overview of Control Modules

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 4.2L BVJ / BNK Overviews

N335 - Intake Manifold Change-Over Valve 4.2L BVJ / BNK Overviews

SA15 - Fuse 5 (on fuse panel engine compartment) Overview of Fuses

SA17 - Fuse 7 (on fuse panel engine compartment) Overview of Fuses

T4a - 4-Pin Connector, black, oxygen sensor (O2S) 1 behind three way catalytic converter (TWC)

T4b - 4-Pin Connector, brown, oxygen sensor (O2S) 2 behind three way catalytic converter (TWC)

Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC)

Z30 - Oxygen Sensor (O2S) Heater 2 (behind Three Way Catalytic Converter (TWC)

(D103) - Connection 3 (in engine compartment wiring harness)

(D113) - Connection 11 (in engine compartment wiring harness)

Previous Diagram 2/10 (Tracks 113-126)

Next Diagram 2/12 (Tracks 141-154)