Diagram 2/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Engine Speed (RPM) Sensor, Camshaft Position (CMP) Sensor, Camshaft Position (CMP) Sensor 2, Engine Coolant Temperature (ECT) Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor 4.2L BVJ / BNK Overviews

G40 - Camshaft Position (CMP) Sensor 4.2L BVJ / BNK Overviews

G62 - Engine Coolant Temperature (ECT) Sensor 4.2L BVJ / BNK Overviews

G163 - Camshaft Position (CMP) Sensor 2 4.2L BVJ / BNK Overviews

J217 - Transmission Control Module (TCM) Overview of Control Modules

J623 - Engine Control Module (ECM) Overview of Control Modules

T3e - 3-Pin Connector, grey, on engine speed (RPM) sensor

T16 - 16-Pin Connector, Diagnostic Coupling

T16c - 16-Pin Connector, black, on transmission control module (TCM)

T17a - 17-Pin Connector, red, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T46a - 46-Pin Connector, left CAN separating connector

(220) - Sensor Ground Connection (in engine wiring harness)

(D106) - Connection 4 (in engine compartment wiring harness)

(D166) - K-Diagnosis Wire Connection (in engine compartment wiring harness)

- CAN-Bus (data wire)

# - Through model year 2005

## - From model year 2006

Previous Diagram 2/6 (Tracks 57-70)

Next Diagram 2/8 (Tracks 85-98)