Crankshaft, Cylinder Block - Fastener Tightening Specifications

Fastener Tightening Specifications










Installing Guide Frame






- Replace bolts - 1 to 20 -.

- Tighten bolts for guide frame as follows:

- Tighten the bolts - 1 to 10 - to 30 Nm using torque wrench.

- Tighten the bolts - 11 to 20 - to 20 Nm using torque wrench.

- Tighten the bolts - 1 to 10 - to 50 Nm using torque wrench.

- Tighten the bolts - 11 to 20 - to 30 Nm using torque wrench.

- Tighten the bolts - 1 to 10 - 90° (1/4 turn) using a rigid wrench.

- Tighten the bolts - 11 to 20 - 90° (1/4 turn) using a rigid wrench.

- Tighten bolts for sealing surfaces of cylinder block/guide frame - dark hatching in the illustration - to 9 Nm in diagonal sequence.

Position Lower Timing Chain Cover and Tighten Bolts as Follows.











Position Left Cover for Timing Chain and Tighten Bolts as Follows.











Position Right Cover for Timing Chain and Tighten Bolts as Follows.