Backrest Cushion, Separating From Upholstery

Individual Power Rear Seat Cushion and Upholstery

Backrest Cushion, Separating from Upholstery





1 Awl (V.A.G 1636 A)

2 Retainer

3 Plastic clips

4 Backrest frame

5 Rubber pieces (Qty. 2)

6 Side clamping strips (Qty. 6)

7 Upholstery clips (Qty. 4)

8 Lower clamping strips (Qty. 5)

9 Backrest heating connector

10 Retaining strip

11 Cover and upholstery

• Removing

• Using Awl (V.A.G 1636 A) - 1 -, carefully pry retainer - 2 - out of plastic clips - 3 -.

• Remove cover from cushion.

• Installing

- Install cover in reverse order of removal.

- Replace damaged plastic clips - 3 -.

- First press retainers - 2 - of cross braces into plastic clips - 3 -.